Search results for '底特律梅西大学毕业证成绩单教育部留学服务留信认证QQ微信1989 88881(University of Detroit Mercy毕业证degree offer diploma Transcript)ivxF'

Spare axle of a rear X-Hub SP or X-Hub SL hubs. X-12 axle end (cod.XHMSLRCLX12MN) and rear SP/SL Disc Bearing preload system locked (BPS) (cod.XHMRADLMN) ARE NOT INCLUDED and must be purchased separately. Compatible with all Carbon-Ti X-Hub SP or SL 142 rear hubs on the market. Compatible with Shimano Microspline and N3W freewheels (the respective specific axle ends XHRCLMSMN and XHRCLN3WMN will be purchased separatly). New matte finish 2023! Learn More

Conversion Kit consists of a front QR15 axle and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned. Converts the X-Hub MTB SL front hub from quick release to QR15. This kit is not compatible with the pre-2012 X-Hub MTB. New matte finish 2023! Made in Italy. Learn More

Conversion Kit consist of a front QR12 axle and the relative lateral end. The bearing preload ring (BPS) si not included and needs to be gotten from the axis owned or ordered separately. Specific for Center Lock, converts the X-Hub SP Center Lock QR15 to X-Hub SP Center Lock QR12. This kit is not compatible with the pre-2012 X-Hub MTB. New matte finish 2023! Made in Italy Learn More

Conversion Kit consist of a front QR15 axle and the relative lateral end. The bearing preload ring (BPS) si not included and needs to be gotten from the axis owned or ordered separately. Specific for Center Lock, converts the X-Hub SP Center Lock QR12 to X-Hub SP Center Lock QR15. This kit is not compatible with the pre-2012 X-Hub MTB. New matte finish 2023! Made in Italy Learn More

Conversion Kit consists of a front quick release axle and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned. Converts the X-Hub MTB SL front hub from QR15 to quick release. This kit is not compatible with X-Hub SP Center Lock hubs. This kit is not compatible with the pre-2012 X-Hub MTB. New matte finish 2023! Made in Italy. Learn More

Conversion Kit consists of a rear 12 mm thru axle and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned. Converts the rear X-Hub SP Disc or X-Hub SL Disc hubs from quick release to 12 mm thru axle. This kit is not compatible with the pre-2012 X-Hub hubs. New matte finish 2023! Made in Italy. Learn More

Conversion Kit consists of a rear quick release and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned. Converts the X-Hub MTB SL rear hub from 12 mm thru axle to quick release. This kit is not compatible with X-Hub SP Center Lock hubs. This kit is not compatible with the pre-2012 X-Hub MTB. New matte finish 2023! Made in Italy. Learn More

Spare Axle of a front X-Hub QR12 SP or X-Hub QR12 SL hubs. QR12 axle end (cod. XHMSLFCLQR12MN) and front SP/SL Disc Bearing preload system locked (BPS) (cod. XHMFADLMN) ARE NOT INCLUDED and must be purchased separately. Compatible with all Carbon-Ti X-Hub front SP or SL QR12 hubs on the market. New matte finish 2023! Made in Italy. Learn More

Spare Axle of a front X-Hub QR15 SP or SL hubs. QR15 axle end (cod. XHMSLFCLQR15MN) and front SP/SL Disc Bearing preload system locked (BPS) (cod. XHMFADLMN) ARE NOT INCLUDED and must be purchased separately. Compatible with all Carbon-Ti X-Hub front SP or SL QR15 hubs on the market. New matte finish 2023! Made in Italy. Learn More

Spare Axle of a front X-Hub SP or SL Boost hubs. QR15 axle end (cod. XHMSLFCLQR15MN) and front SP/SL Disc Bearing preload system locked (BPS) (cod. XHMFADLMN) ARE NOT INCLUDED and must be purchased separately. Compatible with all Carbon-Ti X-Hub front SP or SL Boost hubs on the market. New matte finish 2023! Made in Italy. Learn More

Spare axle end of a front SP or SL X-RS-1 hubs. New matte finish 2023! Made in Italy. Learn More

Spare axle end of a front X-Hub QR12 SP or SL hubs. Compatible with all Carbon-Ti front QR12 SP or SL hubs. It is not comaptible with X-Hub SP Center Lock QR12 (please check the specific XHSPCLFCLQR12MN axle end). It is not compatible for quick release axle (please check the specific XHMSLFCLMN axle end). New matte finish 2023! Made in Italy. Learn More

Spare axle end of a front X-Hub QR12 axle. Compatible with front X-Hub SP Center Lock QR12 hub. It is not compatible with X-Hub SP or SL QR12 (please check the specific XHSLFCLQR12MN axle end). It is not compatible with front X-Hub SP Disc, SL Disc; Boost hubs. New matte finish 2023! Made in Italy. Learn More

Spare axle end of a front QR15 or Boost axle. Compatible with front X-Hub SP/SL QR15 or Boost hub. It is not compatible with front X-Hub SP Center Lock QR15 (please check the specific XHSPCLFCLQR15MN axle end). New matte finish 2023! Made in Italy. Learn More

Spare axle end of a front X-Hub QR15 axle. Compatible with front X-Hub SP Center Lock QR15 hub. It is not compatible with front X-Hub SP/SL QR15 or Boost Hubs (please check the specific XHSLFCLQR15MN axle end). New matte finish 2023! Made in Italy. Learn More

Spare axle end of a front quick release axle. Compatible with front X-Hub SP/SL quick release hub. It is not compatible with X-Hub SP Center Lock or Boost hubs. New matte finish 2023! Made in Italy. Learn More

Conversion Kit consists of a Al7075-T6 MTB freewheel for Shimano HG MTB/ROAD 10-11-12 speed. Not compatible with SRAM XD 11-12 speed. Supplied pre-assembled for a quick replacement. It is complete with two bearings, a lip seal, four pawls, four springs, and a 1.8 mm spacer for mounting a 10-speed cassette. Compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017) or with X-Hub MTB SL made before 2012 (with 15 mm internal axle).

Pay attention in case of conversion from hub with free wheel N3W or Microspline (to which the specific axle ends) it is necessary to buy separately the X-12 axle compatible with it (CODE: XHMSLRCLX12MN). New 2023 matte finish! Made in Italy.

Learn More

Spare axle of a rear X-Hub SP Boost or X-Hub SL Boost hubs. X-12 axle end (cod.XHMSLRCLX12MN) and Rear SP/SL Disc bearing preload system locked (BPS) (cod. XHMRADLMN) ARE NOT INCLUDED and must be purchased separately. Compatible with all Carbon-Ti X-Hub SP or SL Boost 148 rear hubs on the market. Compatible with Shimano Microspline and N3W freewheels (the respective specific axle ends XHRCLMSMN and XHRCLN3WMN will be purchased separately). New matte finish 2023! Learn More

Conversion Kit consists of a Al7075-T6 13s Campagnolo N3W (compatible with campagnolo ekar 13speed) , two bearings, a lip seal, a four pawls and four springs. Compatible with X-Hub SP Disc X-12 (12x142mm) with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SL Disc! ATTENTION: Compatible for hubs that have X-12 axle sold after March 2020 recognizable by the presence of a laser marking on the axle end. For axles sold before March 2020 please check the respective conversion kit complete with axle (ref. XHCKFWMS56TA142CLMN).
Supplied pre-assembled for a quick replacement. Made in Italy. Learn More

Conversion kit consists of a freewheel body in AL7075-T6 N3W compatible (Campagnolo Ekar 13 speed) with two bearings, a lip seal, four pawls and four springs as well as the internal axle and axle end (the bearing preload can be recovered from the existing hub). Compatible with X-Hub SP Disc X-12 (12 x 142) hubs with freewheel with 56 point of engagement sold since September 2017. It is not compatible with the X-Hub SL Disc hubs! It is not compatible with the X-Hub SP Disc X-12 hubs with freewheel with 28 points of engagement (sold until September 2017). Attention: the complete internal axle is essential for the conversions of all hubs sold before March 2020. New matte finish 2023! Made in Italy. Learn More

Conversion Kit consists of a AL7075-T6 MTB freewheel for Campagnolo 11-12 speed. Supplied pre-assembled for a quick replacement complete with two bearings, a lip seal, four pawls. Compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017) or with X-Hub MTB SL made before 2012 (with 15 mm internal axle).

Pay attention in case of conversion from hub with free wheel N3W or Microspline (to which the specific axle ends) it is necessary to buy separately the X-12 axle compatible with it (CODE: XHMSLRCLX12MN). New matte finish 2023! Made in Italy. Learn More

Conversion Kit consists of a Al7075-T6 12s Shimano Micro Spline, two bearings, a lip seal, a four pawls and four springs. Compatible with X-Hub SP/SL Disc X-12 (12x142mm) and SP/SL Boost (12x148mm) with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SP Disc X-12 with 28 point of engagements freewheel (sold until September 2017). ATTENTION: Compatible for hubs that have X-12 axle and rear Boost 148 sold after March 2020 recognizable by the presence of a laser marking on the axle end. For axles sold before March 2020 please check the respective conversion kit complete with axle (ref. XHCKFWMS56TA142CLMN or XHCKFWMS56TA148CLMN). Supplied pre-assembled for a quick replacement. New matte finish 2023! Made in Italy. Learn More

Conversion kit consists of a freewheel body in AL7075-T6 Micro Spline 12 speed compatible with two bearings, a lip seal, four pawls and four springs as well as the internal axle and axle end (the bearing preload can be recovered from the existing hub). Compatible with X-Hub SP Disc X-12 (12 x 142) and X-Hub SL Disc X-12 (12 x 142) hubs with freewheel with 56 point of engagement sold since September 2017. It is not compatible with the X-Hub SP Disc X-12 and X-Hub SL Disc X-12 hubs with freewheel with 28 points of engagement (sold until September 2017). Attention: the complete internal axle is essential for the conversions of all hubs sold before March 2020. New matte finish 2023! Made in Italy. Learn More

Conversion kit consists of a freewheel body in AL7075-T6 Micro Spline 12 speed compatible with two bearings, a lip seal, four pawls and four springs as well as the internal axle and axle end (the bearing preload can be recovered from the existing hub). Compatible with X-Hub SP Boost and X-Hub SL Boost hubs with freewheel with 56 point of engagement sold since September 2017. It is not compatible with the X-Hub SP Boost and X-Hub SL Boost hubs with freewheel with 28 points of engagement (sold until September 2017). Attention: the complete internal axle is essential for the conversions of all hubs sold before March 2020. New matte finish 2023! Made in Italy. Learn More